Let’s talk about the 650mm Carbon Fiber IR Lamp
We built these 230V 2600W lamps for the heavy lifting—the kind of industrial heating that doesn’t quit. If you’ve used standard quartz halogen tubes, you’ll notice these feel different. The carbon fiber elements change how the heat actually hits your target. At 650mm, we’re talking about a wide, steady spread of heat across a big area. It’s all about getting that consistent power density without any weird gaps. The power side of things Running 2600W at 230V is no joke. It puts a real strain on your power supply. We landed on the 650mm length for a reason: it’s the sweet spot. It balances raw heat output with how long the lamp actually lasts. If you try to cram too much wattage into a shorter tube, you’re just asking for a burnout. By keeping this specific ratio, the filament gets up to temperature smoothly. No hot spots, no cracked quartz. Just steady heat. Why bother with carbon fiber? Here’s the thing. Carbon fiber handles the “stretch” of thermal expansion way better than old-school metal coils. That makes these a breeze to swap into aging OEM machinery. Plus, the heat is concentrated in the medium-to-long wave spectrum. Instead of a sharp, surface-level hit, the heat actually soaks into the material. It’s a much more uniform feel. A few tips for the install You’ve got to be precise with the wiring. Make sure your connectors can actually handle 2600W, or you’re going to end up with a melted housing. Not a great look. Since these lamps put out a massive amount of energy, your airflow needs to be on point. If you trap too much heat around the ends of that 650mm tube, you’ll kill the lamp’s lifespan. And one last thing—double-check your reflector alignment. You want that IR energy hitting your product, not baking your own machine’s chassis.