Technical Analysis of 560mm 1500W Carbon Fiber Infrared Heating Lamps

September 5, 2026

Let’s talk about the 560mm 1500W Carbon Fiber Heating Lamp

We built these lamps for the tough jobs—the kind of high-intensity heat where your standard quartz heaters just give up. Putting 1500W of power into a 560mm tube creates a very specific kind of heat. It hits the surface of your workpiece exactly where you need it, rather than wasting energy by heating up your entire machine chassis. Why carbon fiber? Here’s the thing: we use shortwave infrared radiation. It’s different from the longwave stuff because it digs deeper into materials and does it much faster. We went with a carbon fiber filament because it can handle a lot more current than old-school tungsten. For you, that means the heat ramps up almost instantly. Plus, the 560mm size fits right into most medium drying tunnels and PET preform ovens without any fuss. The guts of the lamp Inside, you’ve got that carbon fiber emitter wrapped in high-purity quartz glass. One of the biggest headaches with metal filaments is that they tend to snap after you cycle them on and off a few times. Carbon fiber doesn’t do that. It holds up. You won’t find yourself swapping out tubes every couple of weeks. Just a heads-up: we’ve spec’d the glass to handle quick temperature swings, but if your setup vibrates a lot, give your mounting brackets a little wiggle room. You don’t want the quartz to crack under pressure. Putting it to work These are basically drop-in replacements for most industrial curing or blowing lines. They give you an immediate punch of heat, which usually means your cycle times drop. But there’s a catch. 1500W in a tube this size getshot. Like, really hot. If your housing isn’t vented properly or your cooling fans are clogged with dust, you’re going to fry your socket connectors. Also, keep an eye on your voltage. Even with the carbon build, big power spikes will eat away at the filament’s lifespan. Keep the power steady, and these things will last.